Laminate Flooring – Coming Soon - a New Almost Impartial Guide to Laminate Flooring, including comprehensive information on laminate floors and getting the best laminate floor for your home.

This part of our website is still under development. If you wish to be kept informed of its launch please submit your email address below:

Submit your email address below for an update when launched.

While we are developing content for this section of our website we are very pleased to recommend the following excellent article by Jason Ashby

What are Laminate Floors made from?

Laminate flooring is usually made up of four layers:

1. Overlay (Wear Layer)
The top wear layer is provided by the melamine resin, a highly wear resistant material that makes laminate flooring so hard wearing. This top layer is very similar to the top layer on counter or kitchen work tops but is usually around 40% stronger. This makes the laminate flooring highly resistant to scratches, burns, dent’s, stains, etc.

2. DPL (Decorative Paper) or HPL (Decorative Paper + Add High Strength Paper)
It is the decorative paper which gives the laminate flooring its individual appearance, ranging from highly authentic wood reproduction, ceramic or stone designs. An important thing to look out for when purchasing laminate flooring is to understand the difference between DPL and HPL. We will talk about this latter

3. Core layer
This is made up of either high-density fibreboard (H.D.F.). Or medium density fibreboard (M.D.F.) This is saturated in resins to make it extremely hard. Most manufactures also add a moisture resistant resin to the core. This is important as it helps keep the flooring protected against moisture penetrating the boards.

4. Stabilizing layer
The bottom layer is the stabilizing layer; this is what gives the laminate floor its stability. It is made up of moisture resistant resins

How is Laminate Flooring Produced?

This is where DPL & HPL are different.

In the direct-pressure laminate process the decorative covering layer and stabilizing layer are pressed together onto the core layer.

While the high-pressure laminate process, on the other hand, the decorative paper and overlay are pressed onto special high-strength paper first. Only in a second stage is this so-called high-pressure laminate glued to the core layer. This makes the flooring a lot tougher and more resistant to dents etc.

How is Laminate Flooring Graded?

Apart from the different warrantees that manufacturers offer and the difference between DPL & HPL the other thing to look out for when purchasing laminate flooring is industry standard load and traffic categories. These are broken into two different categories and are as follows.

Residential

Class 21 – Moderate Loads. Ideal for bedrooms etc.

Class 22 – Normal Loads, Ideal for living rooms etc.

Class 23 – Heavy Loads. Ideal for anywhere in the house (except bathrooms)

Commercial

Class 31 - Moderate Loads. Hotel Rooms, meeting rooms, etc.

Class 32 – Normal Loads. Offices, waiting rooms, etc.

Class 33 – Heavy Loads. Large offices, shops, public buildings.

I hope this information was helpful for you. My name is Jason Ashby and I have over 20 years experience in the flooring trade. Click here for more information on Laminate Wood Flooring Laminate Flooring